Vonixx Snow Foam Cannon Pro 1L
$149.99
Skip to product information
Vonixx Snow Foam Cannon Pro 1L
$149.99
SNOW FOAM PRO — TRANSPARENT PETG 1 L
Professional Adjustable Foam Cannon
Description
Vonixx Snow Foam Pro is a professional foam cannon designed for pressure-washer vehicle washing. It creates dense foam that helps loosen accumulated dirt before contact washing, reducing the risk of scratches and swirl marks.
The “PET Transparent” designation refers to its reinforced, transparent PETG reservoir, which makes it easy to monitor the remaining cleaning solution. Vonixx
Key features
- Professional pressure-washer foam cannon
- Reinforced transparent PETG reservoir
- 1-liter capacity
- Adjustable chemical-mixture control
- Adjustable spray pattern from 0° to 90°
- Produces thick, consistent foam
- Helps loosen stubborn contamination
- Brass, stainless-steel, plastic and PETG construction
- Compatible with electric and gas pressure washers
- Includes a ¼-inch quick-connect adapter
Pressure-washer requirements
| Specification | Requirement |
|---|---|
| Operating pressure | 1,000–5,000 PSI |
| Minimum water flow | 1.7 GPM |
| Connection | ¼-inch quick connect |
| Reservoir capacity | 1 liter |
Included components
- Snow Foam Pro cannon
- Transparent 1 L reinforced reservoir
- 1.10 mm orifice
- 1.15 mm orifice
- 1.30 mm orifice
- Universal pressure-washer filter
- ¼-inch connection adapter
Directions
- Apply thread-sealing tape to the threaded brass-adapter connection.
- Firmly attach the brass adapter to the foam cannon.
- Connect the transparent suction tube to the fitting underneath the cannon.
- Fill the reservoir with water and the selected car-wash product.
- For improved foam production, Vonixx recommends using warm water.
- Slowly attach the reservoir to avoid damaging the threads.
- Shake the reservoir to create a uniform mixture.
- Connect the foam cannon to the pressure washer.
- Adjust the upper valve to control the amount of cleaning mixture dispensed.
- Rotate the front nozzle to change the spray pattern from narrow to wide.
Care recommendations
- Rinse the reservoir, suction tube and cannon after use.
- Run clean water through the cannon before storing it.
- Do not overtighten the PETG reservoir.
- Confirm that the selected orifice matches the pressure washer’s output.
- Store empty and dry.
- Protect the reservoir from impacts and prolonged direct sunlight.
Available size
- 1 L