V10

V10

Heavy-Cut Compound for Extra-Soft Asian Clear Coats

Description

V10 is a heavy-cut polishing compound formulated specifically for Asian and other extra-soft automotive clear coats.

It removes P1200–P1500 sanding marks, deep scratches, oxidation, and defects from neglected paint while maintaining controlled cutting action and producing a high-gloss finish.

Key features

• Designed for Asian and extra-soft clear coats

• Removes P1200–P1500 sanding marks

• Corrects deep scratches and oxidation

• Provides controlled cutting performance

• Produces excellent gloss and finish

• Long working time

• Resists drying and caking on the panel

• Generates little polishing dust

• Ready to use—no dilution required

Recommended surfaces

• Clear-coated automotive paint

• Chrome surfaces

• Painted wheels

• Compatible piano-black painted surfaces

Do not use on unpainted plastic or plastic piano-black trim.

Directions

1. Shake the bottle thoroughly.

2. Clean and decontaminate the surface.

3. Apply enough product to work an area approximately 50 × 50 cm.

4. Polish with overlapping crosshatch passes using light-to-moderate pressure.

5. Continue until the compound forms a thin, transparent film and the desired correction is achieved.

6. Remove residue with a clean microfiber towel.

7. Inspect and repeat if necessary.

Machine and pad guidance

The general directions mention a broader rotary range of 1,200–1,800 RPM, but the technical section specifically recommends 1,200–1,400 RPM with light-to-moderate pressure.

Restrictions

Do not use on:

• Hard clear coats

• Unpainted plastic

• Plastic piano-black trim

• Leather

• Glass

On repainted panels, wait at least 30 days after painting before using V10.

Available size

• 500 ml

Source: Official Vonixx V10 product page